It’s simple to figure out a water-damaged iPhone. For an iPhone 4, you just need to glance at the charging port, whereas for iPhones 5, 6, and 7, you only need to look at the SIM card tray slot. When your device has been damaged by water, a small white tab will become red.
Water-damaged iPhone Common Issue
Water damage to your phone might result in a variety of problems. Which issue you’re dealing with will determine how to fix a water-damaged iPhone. The following are some of the issues:
It’s possible that your iPhone won’t power on because it’s short-circuited or because some of the internal components have been damaged or corroded, putting your phone’s circuits at risk. Unfortunately, you’ll have to take your iPhone to a specialist to have it repaired if it has been damaged by water.
If your iPhone won’t charge after being submerged in water, it’s most likely due to a problem with the charging port. This is more likely if the water got into your phone through the charging connector. Because there are exposed electrical components here, it’s very likely that they’ve corroded or that your iPhone’s battery has failed. If this is the case, make sure the port is dry before plugging in your phone to avoid a short circuit.
Water can cause damage to your screen, resulting in black patches or lines behind the glass. Because you won’t know if the damage is permanent or will cause additional problems right away, you should switch off your iPhone and let it dry for as long as possible. While this may appear to be a simple solution for how to mend a water-damaged iPhone, you should be aware that the circuitry may still be damaged. Damaged circuits might cause further corrosion, causing the screen to stop working. Take your iPhone to a specialist to get evaluated and any issues fixed.
The speakers on your iPhone may be affected if it gets wet, but it can be difficult to identify if this is the problem or if there is a broader problem that has gone unnoticed. If you feel the problem is caused by water, make sure your iPhone is completely dry. Before testing the speaker, wait a few minutes after turning it back on to back up all of your data. Using a speaker with water in it could cause your phone to short-circuit. After you’ve backed up your data, try playing a ringtone or some music. While this will assist you in determining whether or not there is an issue, do it last so you don’t end up further hurting your phone.
Related Article: iPhone Troubleshooting: How to Fix Common Problems
What to Do If You Drop Your Phone in Water
While iPhone water damage repair is possible, there are several precautions you should take right away if your iPhone has been dropped in the water. These steps are as follows:
- To avoid a short circuit, turn off your phone.
- Remove your case so that the water does not get trapped inside.
- Wipe down your iPhone, including the charging port, SIM card tray, and headphone jack, with an absorbent towel.
- Place your phone somewhere where it will be able to dry naturally for 48 to 72 hours.
Trade-In Your Old iPhone to iPhone 13